Permit Plans
Permit drawings and sealed documents, with the scope and responsible designers agreed for your project.
RESIDENTIAL
Pool & Screen Enclosure Plans for Florida projects
Site and permit documentation for pools, decks and screen enclosures.
What the work involves
The pool, deck and enclosure need to be considered together. Their location affects setbacks, access, drainage and the relationship to the house. Barrier provisions, equipment services and the enclosure's structure also need to be coordinated for the permit application.
The scope may include
- Site plan with setbacks to the pool and the cage
- Pool and deck layout with dimensions
- Screen enclosure plan and elevations
- Footing and slab details for the cage
- Pool barrier and gate layout
- Equipment pad and bonding plan
- Deck drain and drainage notes
- Screen panel layout and door schedule
The final documents and any separate engineering work are confirmed with the practice before work starts.
Bring the site and supplier information together
Share the survey, proposed pool layout and enclosure supplier’s information. The pool, deck, access and relationship to the house need to be shown consistently across the package, with drainage and barrier arrangements considered for the proposal.
Confirm which drawings come from the pool contractor or enclosure supplier and which site or architectural work is being requested. Structural and equipment design may be supplied by others. The appointment should make those boundaries clear so the required information is coordinated.
Common project situations
Examples of where this service can help:
- In-ground pool with a screened cage
- Above-ground pool with a deck
- Screen enclosure added over an existing pool
- Pool deck replaced around a pool
- Spa and hot tub installation
- Safety barrier fence around a pool
Planning the scope
These points help define the work before drawings or reports are prepared.
Existing conditions to discuss
- Rear yard with enough room to meet the setback
- Existing deck that has to receive the cage footings
- Pool equipment pad beside the house
- Grade that slopes toward the house
- An older pool with no barrier around it
Coordination with other specialists
- Structural design of the screen enclosure
- Electrical bonding and grounding of pool equipment
- Plumbing for pool fill and equipment
- Gas for a pool heater
- Barrier inspection under the pool safety requirements
- Deck or paver installation
Issues that may affect review
- A pool or cage inside the required setback
- A barrier that does not meet the safety requirements
- Equipment without bonding documentation
- A cage attached to a house wall of unknown framing
- Deck and cage area pushing past the lot coverage
- Drainage that would flow toward a neighbouring property
Work to discuss separately
- Pool construction and equipment installation
- Engineering of the cage and deck structure
- Planting and sprinkler design
- Fencing beyond the pool barrier
- Outdoor kitchen construction
FLORIDA PERMIT DATA
What the permit records show
Data through August 2026
- Matching permits
- 106,295
- Median declared job value
- $35,000
- Middle 50% of declared values
- $9.8k–$65.2k
- Permits with a declared value
- 97,940
"swimming pool" appears in 106,295 matching permits in the Florida records we analyzed. Declared job value is the value shown on the permit application, not a contract price, and it is based on 97,940 matching permits with a declared value.
How we count.
How the work progresses
Typical steps are outlined below. The practice confirms the scope and who handles each stage.
- Rear yard measured against the setbacks
- Pool and cage located on the lot
- Barrier and gate layout drawn
- Equipment and bonding information collected
- Set prepared and submitted for the pool and enclosure permits
- Barrier and enclosure comments answered
Questions about this service
Do I need a permit for a pool?
A new pool generally requires a permit, with supporting site, structural and equipment documents. Confirm the package and inspections required for the proposed pool with the local building department and pool contractor.
How close can a pool be to the property line?
The setback and the point from which it is measured come from local rules. Pool, deck, enclosure and equipment setbacks may differ. A survey and a review of the specific lot are needed before fixing the layout.
What pool barrier is required in Florida?
Florida law recognizes specified safety features for new residential pools, with additional requirements that may apply locally. A fence or enclosure, alarms and safety covers are not interchangeable in every situation. Confirm a compliant arrangement for the proposed pool rather than select a feature in isolation.
Does a screen enclosure need a permit?
A new screen enclosure commonly requires a permit and structural documentation. Its supports, connections and wind design need to suit the site and existing construction. Confirm whether it will be submitted with the pool work or separately.
What happens after I send a request?
We pass your project details to a Florida architecture practice. Discuss the scope, fees and schedule directly with the practice before deciding to proceed.
Related services
Structural Drawings
How structural design is coordinated with architectural drawings and the responsible engineering provider.
Site Plans
Drawings showing proposed improvements in relation to the property and site constraints.
Outdoor Living Architect
Design and permit drawings for lanais, covered patios, decks and outdoor kitchens.
Tell us about your project
Share the location and what you have in mind. A practice can review the scope and quote the work you need.
Prefer to talk it through? (321) 462-5592 or ask@floridaarch.com